What 2 Stroke Engine Fuel oil ratios to be used

Do you want to know what two-stroke fuel ratio to be used for the dirt bike, then you are at the right place.

Here we will discuss all the aspects of mixing the fuel-oil ratio and the best ratio for its hundred percent efficiency and performance?

It can be tough and hard for anyone because mixing it right is the most important thing. If there is something wrong and a mistake is made, then it can be a disaster for your engine, even if it can be destroyed completely.

But if you wish to know the answer to this question, then I will say a mixture ratio according to the manufacturer of your dirt bike will be perfect.

Because these are the bike manufacturers and they have made it so they know all the mechanisms and parts of the engine and their recommendation will be the best answer to your question. Do You Need Insurance on A Dirt Bike? You can understand it by this article.

What Fuel oil ratios to be used in 2 Stroke Engines?

As the name implies, a two-stroke engine is differently made from a four-stroke engine. Here you can see the difference between the two-stroke.

It means for every turn of the crank, and the two-stroke engine is generating one power stroke. On the other hand, we see a four-stroke engine generates one power stroke for every four strokes.

That is why the oil-fuel mixture enters the crankshaft and then enters into the cylinder when the charge enters the crankcase. This mixture lubricates the crankshaft, and then it enters into the cylinder and reduces friction between the piston and cylinder surface.

In the four-stroke engine, the scenario is different from the two-stroke engine.

Why is oil mixed with fuel?

In 4 stroke engines, there is the best lubrication system or Splash type of lubrication system.

When it comes to the two-stroke engines can’t use such a dedicated lubrication system because of two-stroke engines; you will see that the inlet and outlet both are mounted on the sidewalls of the cylinder.

If two-stroke engines pump lubrication systems or Splash type are used, the oil may enter in bores and block them.

There is an oil sump inside the crankcase of the four-stroke engines, and a crankcase in two-stroke engines is used for pumping the air-fuel mixture to the combustion chamber. So it makes it unusable for storing lubrication oil.

Hence the use of a dedicated lubrication system in a two-stroke engine is not possible, and lubricant oil is mixed with fuel to reduce the area of cylinder and piston.

How to mix two-stroke fuel for a dirt bike?

Step 1: Find out the proper mixing ratio for your dirt bike.

Determine the ratio for the mixture to be made, and it is the most important factor to get all the information regarding this.

Step 2: Have one oil measuring cup, jug, or container

For measuring and pouring the oil into the fuel, you need one jug or container for this that makes your work very easy.

Step 3: Using this measuring cup, you have to mix up oil and fuel with ratio accurately and then pour it inside the container where the oil is.

Cleaning the jug or container properly, you need to put a little bit of oil inside it and shake it until it is completely dissolved with the oil, then again pour it into the container of your fuel.

Step 4: When you buy the oil, you should go for branded companies only. From my point of view, there are many companies which are best like belt and Castrol. Using premium oil for your two-stroke engine will give 100% efficiency, and it will enhance the performance of the bike.

Step 5: Never go to save your money when buying the fuel and oil for your bike. Always go for a premium one that has higher quality. When you finish the proper mixing of oil and fuel, pour it inside the fuel tank.

Oil Fuel Ratio Chart

The most common ratio for two-strokes is between 32:1 and 40:1, which means your mixture of gasoline 40 parts is mixed with one part of the oil.

Mixing Ratio (Gas:Oil)Volume of GasolineVolume of 2stroke Oil
32:11 ltr31.25 ml
40:11 ltr25 ml
50:11 ltr20 ml

What is the ratio for yz250?

A YZ 250 runs at the ratio of 32:1. Owner’s manual also shows th e same ratio. Get the owners manual rom your local dealers. You can see You can see that many riders run their bikes at 40:1.

How much oil do I add to 5 Litres of petrol?

Here is the mixing ratio of oil with petrol.
Petrol quantity – 5 Litres
Oil – 0.10 Litres
Petrol quantity – 10 Litres
Oil – 0.20 Litres

Final words

I hope now you will also be able to understand what two-stroke engine oil ratios to be used?

We have explained in detail the mixing process of oil with fail to prepare a mixture.